I realize this doesn’t fall under the heading of “graphics,” but I’ll bet a lot of you have an iPod touch. Even though I’d heard that the screen is sturdy and scratch-resistant, I wanted to ensure its smooth surface would remain unmarred.
There are a bazillion products to protect these things; I first bought a protector for about $20 that used a squeegee, sponge, and a small container of liquid to adhere the film. I made quite a mess, but with a lot of squeegeeing (is that a word?) I finally eliminated all the bubbles, only to find a piece of lint trapped smack in the middle. Aargh!
Then I found this product, absurdly priced, on Amazon. At first glance, you might get the idea that this is a cheap product. Its enthusiastic tagline — “The greatest guarder for LCD screen” — is quaint. The back of the package says “For iTouch II,” but it fit my iPod Touch 3rd gen perfectly. (Despite the illustration, it wouldn’t be appropriate for iPhone, unless you’re willing to cut a little hole for the speaker.) But it’s very well made, smooth and flawless, and the application procedure is painless and well thought-out.
It’s currently priced at $3.00, so I ordered 5 of them (in case I botched the installation–still cheaper than the one protector I’d already used). This protector provides a “tack cloth” to clean dust off the screen (I recommend using a good glass cleaner first). And it has a unique approach: there are two sheets protecting the screenguard: one covering the adhesive side, and one to act as a thick carrier sheet as you position the protector. A small protruding tag on the carrier sheet makes it easy to position the protector and use your fingers (or the tack cloth) to “roll across” the sheet and anchor it. The surface is smooth (not “rubbery” like the previous protector I used). It’s crystal clear, and you don’t even know it’s there. Highly recommended.